YOUR SOURCE FOR PREMIUM GRILLS & SMOKERS

(Google Translate)

Yoder Smokers Pellet Grill Replacement Thermocouple

 48,76

Replacement thermocouple for Yoder Smokers pellet grills.  Make sure you have verified which thermocouple is compatible with your grill.

*IMPORTANT COMPATIBILITY QUESTIONAIRE*

YS480

  • Serial numbers after 74001
  • Serial numbers before 74001 and ACS (Wifi) controllers
      • You will need the Short J-type probe
      • If you have upgraded or replaced your controller you may need the PT-1000 probe
      • You can verify here:  Temp Probe Verification
      • If no probe type is visible in the settings, make sure you are connected to Wifi and allow the firmware to update to the latest version
      • If updating the firmware is not an option for you, you can assume that your version requires the Short J-type probe
  • Legacy (non-Wifi) controllers with firmware R37 and newer
      • You will need the Short J-type probe
  • Legacy (non-Wifi) controllers with firmware older than R37
      • You will need the Long J-type probe

YS640

  • Serial numbers after 74001
  • Serial numbers before 74001 and ACS (Wifi) controllers
      • You will need the Short J-type probe
      • If you have upgraded or replaced your controller you may need the PT-1000 probe
      • You can verify here:  Temp Probe Verification
      • If no probe type is visible in the settings, make sure you are connected to Wifi and allow the firmware to update to the latest version
      • If updating the firmware is not an option for you, you can assume that your version requires the Short J-type probe
  • Legacy (non-Wifi) controllers with firmware U29 and newer
      • You will need the Short J-type probe
  • Legacy (non-Wifi) controllers with firmware older than U29
      • You will need the Long J-type probe

YS1500

  • Serial numbers after 74001
  • Serial numbers before 74001 and ACS (Wifi) controllers
      • You will need the Short J-type probe
      • If you have upgraded or replaced your controller you may need the PT-1000 probe
      • You can verify here:  Temp Probe Verification
      • If no probe type is visible in the settings, make sure you are connected to Wifi and allow the firmware to update to the latest version
      • If updating the firmware is not an option for you, you can assume that your version requires the Short J-type probe
  • Legacy (non-Wifi) controllers
      • You will need the Short J-type probe

CIMARRON